8.25 mm, f/3.0 41d HFOV 16MP (No Distortion)


New product

PeauProductions Lens

8.25 mm, f/3.0 41d HFOV 16MP (No Distortion)

More details

approximately 8 working days

189,00 € Tax included

Add to wishlist

Bequeme Zahlung
Bequeme Zahlung

More info

8.25 mm, f/3.0 41d HFOV 16MP(No Distortion)

Ideal lens for Yuneec Typhoon or CGO3/CGO3+ camera. For CGO3/CGO3+ a passebder lens holder required (see accessories).

The 8.25 mm is our newest 4K lens for compact m12 mount cameras such as the GoPro Hero and Yuneec Typhoon. With its 41 degree HFOV 16MP sharp 7 glass non-fisheye optics this lens captures the entire image sensor in perfect edge-to-edge sharpness (see example media below).

No fisheye/barrel distortion means objects are naturally straight and just as your eyes see the world. While auto camera mode performs very well on the Typhoon H even with the 44 degree narrower FOV (2x zoom!), we recommend keeping the shutter speeds at 1/500s or slower to reduce jello from the rolling shutter during a full sun shoot. If the slower shutter speeds are too bright you can add our ND filter to stop down the light.

When installing into the Yuneec Typhoon CGO3/CGO3+ cameras you will need to therefore purchase a new lens mount as the stock mount does not have the proper threads to hold it. Installing the new lens mount is quite difficult as the glue holding the original mount to the sensor board is tough to separate. Once you do though it's simple to swap to the new mount and thread-in-the-8.25 mm lens. We also sell modified CGO3+ cameras with the 8.25 mm professionally installed and focused if performing the install seems too daunting of a task (especially considering the requirement for removing the original lens mount).

The 8.25 mm lens works great when installed into a GoPro Hero 4/3+/3 and does not need a new lens mount to focus properly. Due to its small size it also does not stick out from the camera when focused thus allowing the use of the waterproof housing with the standard backdoor. Since the FOV of the 8.25 mm is very narrow (3x zoom compared to stock lens) it is not recommended to be used on mounts that may transfer vibrations to it. This means that on mounts such as a 3DR SOLO drone you will not be able to use video mode with good results due to the noticeable rolling shutter issue. Photo capture, especially for surveying and panorama is perfectly fine though if vibration are minimized.

When installed into the Sony and Yi action cameras you can also use the waterproof housing when the 8.25 mm lens is installed.

Technical Data:

Model NumberGP82530
Focal Length8.25 mm
35mm Equivalent (on 1/2.3" sensor)47.0 mm
Fisheye/Barrel DistortionNO
Black VignettingNO
Weight4.24 g
Angle of View (V*H*D)32 x 41x 51 degrees
Aperture (f Stop)3.0
Back Focal Length (BFL)4.65 mm
Dimensions (Diameter x Length)12.00 x 15.34 mm
Native Camera Sensor Support1/2.3"
Native Megapixel Support16MP
Thread MaterialMetal
Optics MaterialGlass - 7 Elements
Dust Ring Included?Yes (DR_A + DR_B)


No customer reviews for the moment.

Write a review

8.25 mm, f/3.0 41d HFOV 16MP (No Distortion)

8.25 mm, f/3.0 41d HFOV 16MP (No Distortion)

PeauProductions Lens

8.25 mm, f/3.0 41d HFOV 16MP (No Distortion)


Customers who bought this product also bought:

4 other products in the same category: